Aimed at professional users, the DJI Phantom 4 Pro V2.0 version delivers video transfers with OcuSync transfer technology at high resolution and low latency. In addition, the DJI Goggles are connected directly to the vehicle, making it possible to experience the flight with a first-person angle. The Phantom 4 Pro V2.0 has anti-impact sensors. Another innovation that comes with the Phantom 4 Pro V2.0 is its built-in screen controller. The built-in screen control system we previously saw in Yuneec and GoPro Karma now also exists in The Phantom 4 Pro V2.0. DJI released a new version of The Phantom 4 Pro drone. He also called it Phantom 4 Pro V2.0. The updated model looks exactly the same as the original model released in 2016, but has a significant difference. That, too, is his quieter work. DJI says the prop sound has been reduced by 60%. Flight Autonomy is equipped with an additional pair of high resolution stereo vision sensors placed at the rear, in addition to infrared detection systems placed at the left and right sides, as well as the pair placed at the front. This network does the 5-direction of obstacle detection and the avoidance of obstacles in 4 directions, protecting the Phantom 4 Pro Version 2 drone set from more obstacles and giving people who take videos the confidence to record more difficult images.
Thanks to the enhanced video processing system, you can capture your videos in 100Mbps bitrate DCI 4K / 60fps (4096 × 2160 / 60fps) while shooting high-resolution slow motion. DJJ Phantom 4 Pro V2.0 also supports H.264 video codec and H.265 video codec (Maximum Resolution: 4096 × 2160 / 30fps). DJI Phantom 4 Pro V2.0 can stay in the air for 30 minutes. In previous DJI drones, the maximum uptime was 25 minutes. It is also transitioning to DJI’s OcuSync transmission technology. The same technology is used in the Mavic Pro. This technology used for live video broadcasting replaces the Lightbridge system used in the old system. OcuSync was designed for low-latency, high-definition video and is used for DJI’S FPV racing instruments. This technology promises better performance than the old system. Aerial imaging is not just used to capture sights; it brings new insight into everything from action scenes to motor racing. Capturing objects moving at high speed has always been difficult for cameras that use an electronic shutter. The Phantom 4 Pro Version 2 Drone is therefore the first DJI Phantom drone to use a mechanical shutter and a wide-span prime lens. A mechanical shutter with a maximum speed of 1/2000 eliminates shake distortions that can occur when shooting images of fast-moving objects or flying at high speed. The electronic shutter also features new Burst Mode shooting, which can shoot 14 fps at 20 megapixels to capture a perfect moment, with a maximum shutter speed of 1/8000 seconds.
- 1 inch 20MP CMOS sensor
- Weight 1388 (including batteries and propellers)
- Distributor Warranty
- Maximum speed S-Mode: 45 km
- Maximum elevation 19685 feet (6000 m)
- Flight time 30 minutes
- Video resolution 4k
- Gimbal-stabilized 4K60 / 20MP imaging
- OcuSync Transmission System
- Flight Autonomy with replacement sensors
- Four Aspects Of Obstacle Avoidance
- Highest 45 mph speed in Sport mode
- Maximum control range 7km
- Visual Tracking Of Moving Subject
- 30 Minutes Flight Time
- Remote control included
DJI Phantom 4 Pro V2.0 features
The main features of the DJI Phantom 4 Pro V2.0 are the coming of a new controller, the use of DJI’s OcuSync for high-resolution and low-latency digital video transmission, thanks to an enhanced propulsion system with FOC sinusoidal drive ESCs, and the reduction of propeller noise by up to 60%. With special propellers flying above your head, you may notice the drone if the weather is sunny and the shadow falls in front of you. It has a 1″ inch CMOS sensor that can take 20MP photos and has a dynamic range of 11.6 stops. This camera features a mechanical curtain system that makes your work much easier when the drone is moving quickly or when shooting a fast-moving object. Another fundamental change is the snapshot transfer (live-streaming video) the Lightbridge transfer system used in all drones of The Phantom 4 series has been replaced by the OcuSync transfer technology used in the Mavic Pro model. The OcuSync system provides snapshot transfer, while providing less standby time. So the delay is diminishing. It allows you to shoot higher resolution video. Basically it performs better than the Lightbridge system by comparison.
DJI Phantom 4 Pro V2.0 Design
A more professional drone model, The DJI Phantom 4 Pro V2.0 is notable for its 4K/60fps video and 20 MP photo-quality 1” CMOS sensor. In addition, the latest version of OCUSYNC with long-range transmission technology, 2.4 and 5.8 GHz wireless transmission frequencies are reliable and stable despite environmental factors that provide users with confidence.
The older features of the DJI Phantom 4 Pro V2.0 are completely identical still with a flight time of about 30 minutes. Still 1-inch 20MEGAPICAL CMOS sensor and 4K/60p video recording. Everything is the same as the design, the 5-axis obstacle avoidance system and the 7km flight range. According to DJI data, The Phantom 4 Pro has 30 minutes of flight time and the Mavic Pro has 27 minutes of flight time. But for The Phantom 4 Pro, which I can reach as the highest flight time on my flights, only 27 minutes is about 22 minutes for the Mavic Pro. I used maximum speed and top quality video shooting modes when calculating flight time. Flight time may vary according to usage. The following functions are included as part of the Active Track mode included in Phantom 4 Pro V2. 0;
Trace: the Drone follows the object from a fixed distance. You can also draw circles around your object using the slider in DJI GO 4 or the joysticks on your controller.
Parallel (Profile): the Drone follows the object from a fixed distance and angle. With the joysticks on the remote control, you can also draw circles around the object.
Spotlight: the Drone will not automatically track the object, but the camera will be accurate to the object. You can perform maneuvers with the joysticks on the remote control, but the orientation controls will be disabled. The joystick and gimbal button on the left will help users to keep your object in the frame.
Ground tracking: the drone’s downward sensor records and maintains flight altitude. It is designed to assist takeoff at slopes no more than 20 degrees.
With an advanced video processing system, it enables you to capture high-resolution slow-motion images, allowing you to capture video at DCI 4K / 60 (4096 x 2160 / 60fps) in the cinema and optimized at a bit rate of 100Mbps. Phantom 4 Pro Drone also H. It also supports 265 video codecs (maximum resolution is 4096X2160 / 30fps). H.265, for a given bit rate of H. It doubles the amount of image processing of 264, providing significantly improved image quality. You can record in high dynamic range D-log mode for better color classification. The resolution and contrast of a lens are critical to image quality, as sharp and vivid pictures can be taken at high resolutions with a quality lens. The all-new Phantom 4 Pro Version 2 drone’s camera features F2.8 wide-angle lenses optimized for aerial shooting, with an equivalent focal length of 24 mm. Eight elements (2 aspherical) arranged in seven groups that fit a smaller, more compact frame. To ensure that photos and videos are sharp and vivid, their images are detailed consistently with low distortion and low dispersion. For the first time with a DJI camera, MTF (modulation Transfer function) results were made public so that people could better compare lens performance.
We wanted to write some cons for DJI Phantom 4 Pro V2.0 but we didn’t really find any negative. The product is one of the best in the market. The price and performance match is great.
DJI Phantom 4 Pro V2.0 price
The DJI Phantom 4 Pro V2.0 version has a price tag of$ 1499 including a standard controller. The price rises to$ 1799 if you want an integrated screen controller.
Version 2 of the DJI Phantom 4 Pro includes the same great features as the original Phantom 4 Pro and includes several enhancements, including enhanced resolution for live video streaming, enhanced connectivity and more on the controller. Like its original, the Phantom 4 Pro Version 2 is a 3-axis stabilized gimbal camera with a 20MP 1 “CMOS sensor that can capture 4 axes / 60 fps video and photos up to 14 fps. Also includes Flight Autonomy Dual rear view sensors and four aspects of obstacle detection and obstacles The system, which incorporates infrared detection for four aspects of avoidance, Phantom 4 Pro Version 2, now uses OcuSync, which provides enhanced live video streaming performance, and wireless integration with DJI Goggles with lighter accessories and overall take-off weight. In short, if you’re thinking about taking professional shots by the sea, the DJI Phantom 4 Pro V2.0.